大家今天跟著我，咱們就嘮點實在的，所有的沼氣，不管是豬糞、雞糞還是牛糞產出來的，都絕對不能直接利用，更不能直接食用！核心原因就一個——里面的硫化氫含量太高了，不僅有安全隱患，對后續要用到的各種設備，還會造成嚴重的腐蝕，這也是咱們沼氣要想發揮作用，第一步就得做脫硫處理的關鍵所在。

　　Everyone, follow me today and let's talk about something practical. All biogas, whether produced from pig manure, chicken manure, or cow manure, must not be directly utilized, let alone consumed! The core reason is that the hydrogen sulfide content inside is too high, which not only poses a safety hazard, but also causes serious corrosion to various equipment that will be used in the future. This is also the key to desulfurization treatment in order for biogas to play a role.

　　而且有個重點我必須跟大家說清楚，同樣是糞便產沼氣，硫化氫的含量差別可不小，其中最厲害的就是牛糞產的沼氣。根據我們之前用專業儀表實測的數據，牛糞所產生的沼氣，硫化氫含量最少都在12000到15000ppm，這個數值真的非常高，腐蝕性也極強。哪怕是豬糞、雞糞產的沼氣，硫化氫含量比牛糞的低一些，但也完全達不到直接利用的標準，一樣會腐蝕設備、留下安全隱患，半點不能馬虎。

　　And there is a key point that I must make clear to everyone, which is that the content of hydrogen sulfide varies greatly when producing biogas from manure, and the most powerful one is biogas produced from cow manure. According to the data we previously measured with professional instruments, the methane produced from cow manure has a minimum hydrogen sulfide content of 12000 to 15000ppm, which is really high and highly corrosive. Even the biogas produced from pig manure and chicken manure has a lower hydrogen sulfide content than cow manure, but it does not meet the standard for direct utilization. It can still corrode equipment and leave safety hazards, and cannot be taken lightly.

　　可能有朋友覺得，不就是一點硫化氫嗎，能有多大影響？其實真不是小事，咱們后續要靠沼氣發電，發電機組的管道、閥門、氣缸這些核心部件，都是金屬材質，長期接觸含硫化氫的沼氣，這些部件會慢慢被腐蝕、損壞，輕則影響發電效率，發電量上不去，重則直接導致發電機組報廢，到時候損失就太大了，得不償失。

　　Some friends may think that it's just a little hydrogen sulfide, how much impact can it have? Actually, it's not a small matter. In the future, we will rely on biogas power generation. The core components of the generator set, such as pipes, valves, and cylinders, are all made of metal materials. If they are exposed to biogas containing hydrogen sulfide for a long time, these components will gradually corrode and be damaged. At the slightest, it will affect the power generation efficiency and the power output will not increase. At the most serious, it will directly lead to the scrapping of the generator set. The losses will be too great and not worth the losses.

　　所以說，不管是哪種糞便產的沼氣，在進行利用、用來發電之前，有三個步驟絕對不能省——脫硫、脫水、加壓，這三步是沼氣安全利用的底線，而其中，脫硫又是最核心、最關鍵的一步，直接關系到設備的使用壽命和沼氣的利用效果。

　　So, no matter what kind of manure is used to produce biogas, before it is utilized for power generation, there are three steps that must not be omitted - desulfurization, dehydration, and pressurization. These three steps are the bottom line for the safe utilization of biogas, and among them, desulfurization is the most core and critical step, which directly affects the service life of equipment and the utilization effect of biogas.

　　大家眼前這套，就是我們發電機組配套的脫硫脫水設備，也是咱們沼氣脫硫、提純的核心裝備，今天就簡單給大家介紹一下，跟著我一步步看，咱們看看沼氣是怎么經過處理，變成能供給發電機發電的合格氣體的，不玩專業術語，就按現場實際流程來講，新手也能一看就懂。

　　The set in front of you is the desulfurization and dehydration equipment that comes with our generator set, and it is also the core equipment for our biogas desulfurization and purification. Today, I will briefly introduce it to you. Follow me step by step to see how biogas is processed into qualified gas that can be supplied to the generator for power generation. Without playing with professional terminology, let's talk about the actual process on site. Even beginners can understand it at a glance.

　　首先大家看這個，這是我們的一級脫水塔。沼氣從發酵池（原文中“飛模式”應為口誤，結合現場場景修正）過來之后，第一步要進入的就是這里，先進行一級脫水處理。大家都知道，沼氣里面除了硫化氫，還夾雜著很多水分，這些水分如果不先去掉，不僅會影響后續的脫硫效果，還會和硫化氫一起，加劇對設備的腐蝕，所以第一步先脫水，把沼氣里的大部分水分分離出來，為后續的脫硫工作做好準備。

　　First of all, let's take a look at this. This is our first stage dehydration tower. After the biogas comes from the fermentation tank (the "flying mode" in the original text should be a slip of the tongue, corrected based on the on-site scene), the first step is to enter here and undergo a first level dehydration treatment. As we all know, besides hydrogen sulfide, biogas also contains a lot of water. If this water is not removed first, it will not only affect the subsequent desulfurization effect, but also, together with hydrogen sulfide, aggravate the corrosion of equipment. Therefore, the first step is to dehydrate and separate most of the water in the biogas, preparing for the subsequent desulfurization work.

　　脫水完成之后，就到了最核心的環節——脫硫，咱們采用的是三級脫硫工藝，不是簡單的一次脫硫，就是為了徹底去除沼氣中的硫化氫，確保處理后的沼氣達標，最大限度保護發電機組?？赡苡信笥褧?，為什么要做三級脫硫？因為不管是牛糞沼氣的高硫化氫，還是豬糞、雞糞沼氣的硫化氫，一次脫硫都很難徹底去除干凈，殘留的少量硫化氫依然會腐蝕設備，三級脫硫就是層層過濾、層層去除，確保最終排出的沼氣，硫化氫含量降到安全標準以內。

　　After dehydration is completed, the most crucial step is desulfurization. We use a three-stage desulfurization process, which is not a simple one-time desulfurization, but to completely remove hydrogen sulfide from the biogas, ensure that the treated biogas meets the standards, and maximize the protection of the generator set. Some friends may ask, why do we need to do tertiary desulfurization? Because whether it is the high hydrogen sulfide in cow manure biogas or the hydrogen sulfide in pig manure and chicken manure biogas, it is difficult to completely remove it with one desulfurization, and the residual small amount of hydrogen sulfide will still corrode the equipment. The three-stage desulfurization is to filter and remove layer by layer to ensure that the hydrogen sulfide content in the final discharged biogas is reduced to within the safety standard.

　　脫完硫之后，沼氣還需要經過加壓處理。這一步我們用到的是羅茨風機（原文中“螺絲風機”為口誤，結合行業常規修正），通過羅茨風機對脫硫、脫水后的沼氣進行加壓，讓沼氣的壓力達到發電機組運行所需要的標準。大家都知道，發電機組發電，對沼氣的壓力有明確要求，壓力不夠，就沒法正常發電，所以加壓這一步也至關重要，半點不能省略。

　　After desulfurization, biogas still needs to undergo pressure treatment. In this step, we use a Roots blower (the word "screw blower" in the original text is a mistake, corrected according to industry norms) to pressurize the desulfurized and dehydrated biogas, so that the pressure of the biogas reaches the standard required for the operation of the generator set. As we all know, when a generator set generates electricity, there are clear requirements for the pressure of biogas. If the pressure is not enough, it cannot generate electricity normally. Therefore, the step of increasing pressure is also crucial and cannot be omitted at all.

　　加壓完成之后，處理合格的沼氣，會被輸送到旁邊的緩沖罐里面進行儲存。緩沖罐的作用很簡單，就是穩定沼氣的壓力，避免壓力波動影響發電機組的正常運行，保證供氣穩定。當緩沖罐里面的沼氣壓力，達到發電機組所需要的固定壓力值時，緩沖罐就會自動輸送沼氣，供給我們的發電機組進行發電，整個流程連貫又高效，不用專人全程看管，特別省心。

　　After the pressurization is completed, the qualified biogas will be transported to the nearby buffer tank for storage. The function of a buffer tank is simple, which is to stabilize the pressure of biogas, avoid pressure fluctuations affecting the normal operation of the generator set, and ensure stable gas supply. When the pressure of biogas in the buffer tank reaches the fixed pressure value required by the generator set, the buffer tank will automatically transport biogas to supply our generator set for power generation. The entire process is coherent and efficient, without the need for a dedicated person to supervise the entire process, which is particularly worry free.

　　我再跟大家強調一遍，沼氣利用，脫硫先行，不管是哪種糞便產的沼氣，都不能省略脫硫步驟。很多朋友圖省事、省成本，直接用未脫硫的沼氣發電，短期看好像節省了一點錢，但長期下來，設備頻繁被腐蝕、出故障，維修成本、更換設備的成本，比脫硫設備的成本高太多，反而虧了。

　　I would like to emphasize once again that the utilization of biogas should prioritize desulfurization. Regardless of the type of biogas produced from feces, the desulfurization step cannot be omitted. Many friends try to save time and costs by directly using desulfurized biogas to generate electricity. In the short term, it seems to save some money, but in the long run, the equipment frequently corrodes and malfunctions, and the cost of maintenance and replacement is much higher than that of desulfurization equipment, resulting in losses.

　　咱們這套配套的脫硫脫水設備，就是專門針對高硫化氫含量的沼氣設計的，尤其是適合牛糞沼氣這種高硫工況，三級脫硫工藝能徹底去除硫化氫，一級脫水+羅茨風機加壓+緩沖罐儲存，全程配套發電機組，既保護了設備，又能保證發電效率，還能讓沼氣得到充分利用，既環保又能創造收益?，F在，大家可以跟著我一起，去我們的發電機組現場看看，實際感受一下經過脫硫處理后的沼氣，是怎么供給發電機組發電的，有任何疑問，也可以隨時問我。

　　Our set of supporting desulfurization and dehydration equipment is specifically designed for biogas with high hydrogen sulfide content, especially suitable for high sulfur conditions such as cow manure biogas. The three-stage desulfurization process can completely remove hydrogen sulfide, the first stage dehydration+Roots blower pressurization+buffer tank storage, and the entire process is equipped with a generator set, which not only protects the equipment but also ensures power generation efficiency, and allows biogas to be fully utilized, which is both environmentally friendly and profitable. Now, everyone can follow me to visit our generator set site and experience how the desulfurized biogas is supplied to the generator set for power generation. If you have any questions, feel free to ask me anytime.